4 compartments With White Wooden Roof birdhouse handcrafted in Raleigh NC. Made of the best USA Made exterior laminated 9 ply- plywood, laminate ply layer sections are glued with water proof glue and sealed with polyacrylic,then sanded, then repeated three times, then cut to size for our woodcrafts. Our birdhouses and woodcrafts after finished are made to last for years in all four seasons. We have now started (as of October 2011) using all made in America Materials.
Even as well as we try to make our products, there some preventive maintenance measures you can take, like cleaning, touch-up painting, and sealing. You will get these instruction in your order. Mount this feeder on a 4x4 inch post. Note: This means that you must have post that measures four inches by four inches, not the wooden post that measures three and one half inches by three and one half inches. You can purchase this post at your local Home-center.
These products are shipped all over the USA and Canada. Instock items are shipped as soon as payment has been cleared Buyer must keep in mind that these birdhouses and feeders are not mass-produced and are made one at a time by one craftsman, and if not in-stock please allow 2 to 3 weeks for shipping. Size: 29 inches high x 13 x 13 inch base and body 10 inches in diameters,
The entrance hole size is 1-1/2 inches, weight 24 lbs. shipping weight
28" high, Base 14" Body 10- 1/2 "
4 separate nest holes, Take top off for cleaning
by removing 2 screws at top trim.
Mount birdhouse at least 5ft off ground for common song birds. Call for more info 919-803-4425
